1. Bereiten Sie Ihre Haut auf die SYNERGY EYE vor, indem Sie den zu behandelnden Bereich gründlich reinigen und alle Make-up- und Schmutzreste entfernen.
2. Trocknen Sie den Bereich gründlich ab.
3. We recommend applying the OPATRA EYE SERUM to the treated area. Apply around the eye area – under the eyes and outer corners. This is optional; however, to achieve the best results, the SYNERGY EYE device should be used in conjunction with Opatra’ s anti-ageing eye skincare range whilst using the device.
4. Lift your SYNERGY device from the docking station and switch the device ON by pressing down the control button for 2 seconds (round button). The yellow LED light indicator will illuminate on the handpiece, along with the low infrared mode.
5. Beginnen Sie Ihre Sitzung - bereit zum Einsatz.
6. Place the head surface (metal applicator) onto your skin, and the Red LED Light and infrared mode and heat and vibration mode (low humming sound) will automatically activate.
7. Apply light pressure whilst slowly moving the SYNERGY DEVICE in slow, sweeping motions from the inner corner to the outer eye.
8. Massage the treated area for approximately 0.5 - 1 minute, on each side.
9. Apply the OPATRA EYE CREAM and continue to massage for a further 0.5 – 1 minutes or until the eye product has been fully absorbed.
10. Wenn Sie die Sitzung beendet haben, SCHALTEN Sie Ihr Gerät aus, indem Sie die Steuertaste 2 Sekunden lang gedrückt halten. Die Anzeigeleuchten schalten sich aus.
11. It’s recommended that you apply a small amount of moisturising cream onto the treated area after each session after treatment.
12. After each use, clean the stainless–steel treatment head with a damp cloth (not wet) or sterilise wipes. Thoroughly dry with a cloth or paper towel and return to the docking station.