1. Prepare your skin for the SYNERGY EYE by cleansing the treated area thoroughly, removing any make-up or dirt residue.
2. Dry the area thoroughly.
3. We recommend applying the OPATRA EYE SERUM to the treated area. Apply around the eye area – under the eyes and outer corners. This is optional; however, to achieve the best results, the SYNERGY EYE device should be used in conjunction with Opatra’ s anti-ageing eye skincare range whilst using the device.
4. Lift your SYNERGY device from the docking station and switch the device ON by pressing down the control button for 2 seconds (round button). The yellow LED light indicator will illuminate on the handpiece, along with the low infrared mode.
5. Begin your session – ready to use.
6. Place the head surface (metal applicator) onto your skin, and the Red LED Light and infrared mode and heat and vibration mode (low humming sound) will automatically activate.
7. Apply light pressure whilst slowly moving the SYNERGY DEVICE in slow, sweeping motions from the inner corner to the outer eye.
8. Massage the treated area for approximately 0.5 - 1 minute, on each side.
9. Apply the OPATRA EYE CREAM and continue to massage for a further 0.5 – 1 minutes or until the eye product has been fully absorbed.
10. When you have completed the session, TURN OFF your device by pressing and holding down the control button for 2 seconds. The indicator lights will turn off.
11. It’s recommended that you apply a small amount of moisturising cream onto the treated area after each session after treatment.
12. After each use, clean the stainless–steel treatment head with a damp cloth (not wet) or sterilise wipes. Thoroughly dry with a cloth or paper towel and return to the docking station.
